MAX100 Human Cremation System
Continuous duty without continuous supervision
The MAX100 is the Matthews Environmental Solutions cremation system for a floor that doesn't stop. It's rated for 10-plus cases a day, handles decedents up to 1,000 lb (454 kg), and adds a 125 cu ft (3.5 m³) secondary chamber, an in-line auto loader, additional combustion air, an additional primary chamber burner, and front or rear cleanout. Matthews connects in real time with full system access to live chamber temperatures, suction, burner and air percentages, valve positions, opacity, and oxygen. Cycle and case data log automatically, and software updates are included. Same MPYRE® interface as every other Matthews machine in your group, and the same 50% less gas per case than our previous technologies. Available in Graphite or Alpine. When it's time to replace your cremation system, replace it once.
Product Highlights
Reduces fuel consumption
by up to 55% compared to standard systems
Enhanced combustion components
including an additional cremation burner and air delivery points for maximum productivity
Designed for demanding schedules
for up to 15+ cases per day
Heavy-duty, extra-wide chamber
accommodates cases up to 1,000 lbs
MPYRE®3 control system
for unrivaled simplicity and fuel savings
Oversize secondary combustion chamber
for maximum speed and minimum emissions
Rear clean-out
for clean, polished family experience in witness cremations
Technical Specifications
Height
9' 7"/2.91 m
Width
8-9"/2.67 m
Length
14' 6.25"/4.43 m
Weight
36,000 lb/16,329.325 kg
Fuel
Natural or L.P. Gas (Oil Available)
Electrical
230 Volts, 1-phase/3-phase
See More Products
BB-3 Metal Recovery Processor
The BB-3 combines dependable post-cremation care, dust control and simple metal recovery into one space-saving processor. As a highly practical cremation processing equipment solution, this system allows small to mid-sized care centers to automate their workflow.
See Product
ECP-200 Cremated Remains Processor
Built for facilities looking for a reliable and dust-proof solution for finishing remains, the ECP-200 is an industry-standard electric system that ensures a consistently fine, sand-like texture. This cremated remains processor removes manual strain and keeps your facility cleaner, longer.
See Product
Flex 180 Autoloader
The Flex-180 Hydraulic Autoloader protects your team from heavy-lifting injuries and optimizes daily operations. Unlike fixed systems, this crematory loading system can rotate and service multiple chambers from a central position, eliminating the need for separate equipment.
See Product
In-Line Autoloader
The In-Line Autoloader is a heavy-duty hydraulic loading system made to eliminate the physical strain and safety hazards of manual loading. This automated system aligns with a chamber door for a seamless, hands-free insertion. If you’re looking to minimize operator heat exposure and completely safeguard your team from heavy-lifting injuries, this rugged crematory loading system provides the precision and protection to keep daily operations safe and easy.
See Product
Max80
The MAX80 is the Matthews Environmental Solutions cremation system built for your whole schedule, in one building or across several. It handles 8 cases a day and decedents up to 1,000 lb (454 kg), with a 43 in (109 cm) door, a 104 cu ft (2.9 m³) secondary chamber, additional combustion air, and front or rear cleanout to fit your floor plan. It runs the same MPYRE® interface as every Pro and Max Series machine: same four steps, same modes, same schedule tool. Train an operator once and they can work any unit in any building. Set the week's schedule in advance. MPYRE® uses 50% less gas per case than our previous technologies, measured across over 300 actual cremations, February to May 2026. Available in Alpine or Graphite. Built to run for decades.
See Product
PolarPak Cooler
Built to handle the demands of post-mortem care, the PolarPak Cooler System is an industry-standard, walk-in refrigeration unit that brings dignified preservation to your facility. If your facility is looking to expand its storage capacity with heavy-duty, energy-efficient mortuary coolers that maintain the optimal climate for post-mortem care and comply with local health regulations, the PolarPak Cooler System is for you.
See Product
Pro30
The PRO30 is the Matthews Environmental Solutions cremation system for a funeral home bringing cremation in-house, or replacing a single retort. It handles 4 to 5 cases a day and decedents up to 750 lb (340 kg), with a 39 in (99 cm) door and front cleanout. MPYRE® takes every case through the same four steps and shows the operator only the actions that apply right now, so a new operator is useful on day one. Case data is entered once in the office and stays on screen through the cycle: ID, name, container, weight, case type, status. Remote preheat, live progress, and alarms come to your phone, and Matthews stays on the machine after the install truck leaves. Available in Alpine or Graphite. Built to run for decades.
See Product
Pro50
The PRO50 is the Matthews Environmental Solutions cremation system for a funeral home that wants room to say yes. It handles 6 cases a day and decedents up to 1,000 lb (454 kg), with a 43 in (109 cm) door and front cleanout, so you can take the case you'd have sent out without adding a person. MPYRE® tells you when a step finishes and when the machine needs you. Load the case, collect the cremated remains, and follow everything in between from the mobile app.* The case on the screen is the case in the chamber, entered once in the office and never re-keyed on the floor. MPYRE® uses 50% less gas per case than our previous technologies, measured across over 300 actual cremations, February to May 2026. Available in Alpine or Graphite. Built to run for decades.
See Product
VERSALIFT 2
The Hydraulic Lift Table is a heavy-duty, multi-purpose table that eliminates the physical strain of manual transfers. Bringing this industrial-grade lift table into your facility gives your staff the mechanical support they need to load and unload with ease.
See Product
VPS-1 Ventless Processing Station
The VPS-1 Ventless Processing Station is a self-contained, mobile workstation. It works with specific cremation processing equipment to capture airborne dust during the transfer and packaging of remains. If your facility wants to improve air quality without having to install exterior wall or ceiling vents, this processor can help act as a protective shield for your team, ensuring your facility is a safer and healthier workspace.
See Product
Talk to an Expert
Every waste stream has a unique set of challenges, from pharmaceutical destruction to agricultural biosecurity. We believe the best systems are built on a foundation of operational insight. Connect with our team to discuss your specific waste challenges and learn how our integrated incineration technology can be tailored to meet your facility’s goals.
"*" indicates required fields